Home | Available Used Machinery | New Machinery | Your Surplus Machinery | Your Machinery Needs | Appraisal | Email Us to Request a Quote.

 

Kitamura Mycenter 3XG Vertical Machining Center, 2012.

 Kitamura Mycenter 3XG Vertical Machining Center

 

Specifications: 

Table working surface…………………………...…... 16.1" x 35.4"

Table load capacity……………………………………...... 1,100 lb.

X-axis travel………………………………………………...... 29.9"

Y-axis travel……………………………………...…………… 17.9"

Z-axis travel………………………………………….……...... 18.1"

Distance table to spindle nose………………..………... 4.3" – 22.4"

Distance table center to column……………...………... 8.5" – 26.4"

Spindle taper………………………………...…………….. CAT-40

Spindle speeds…………………………………….. 40 – 15,000 rpm

Cutting feed max. (X,Y,Z)………………………….…….. 1417 ipm

Rapid traverse (X,Y)……………………………………… 1969 ipm

Rapid traverse (Z)……………………………………..…... 1417 ipm

Stations in tool changer………………………………….……….. 30

Max. tool length…………………………………….………... 11.81"

Max. tool diameter (tools in/out adjacent pots)……......... 2.95"/5.90"

Max. tool weight……………………………….……………. 17.6 lb.

Spindle motor (10 min./cont.)…………………….……..… 20/10 Hp

Machine electrics……………………….… 3/50-60/200-220/30KVA

Dimensions (approx.)……………………….. 135"W x 85"D x 120"H

Weight (approx.)……………………………..……………. 14,740 lb.



Equipped with:

Arumatik Mi CNC Control with touch screen, remote MPG,

  CF card slot, USB port (software updated in 2018)

RS-232 and Ethernet ports

30 Station side-mount swing-arm ATC (with miscellaneous pull-studs)

Tsudakoma TPC Jr. indexer (to .001°) with servo-control, tailstock,

  10" faceplate, & 5C collet nose

Coolant through spindle (up to 1000 psi)

Rigid tapping

Renishaw TS27 probe (wired-in)

Air Turbine air supply for hi-speed tool attachments

Dual chip augers

Chip conveyor (vari-speed)

Spin window

Manuals

Vise, tool kit, filters, and touch-up paint

Mastercam post-processor available

***ONLY 3902 HOURS***

DESCRIPTIONS ARE CORRECT TO THE BEST KNOWLEDGE OF THE SELLER BUT ARE NOT GUARANTEED.
BUYERS ARE ENCOURAGED TO CHECK IMPORTANT CHARACTERISTICS.

 

Please email us for a complete quotation. Include in the message your name, company name, location, and phone number.
We do not send quotations without this information.

Email Us to Request a Quote.


Home | Available Used Machinery | New Machinery | Your Surplus Machinery | Your Machinery Needs | Appraisal

 

Link to Direct Capital

- FINANCING BY DIRECT CAPITAL -.

 

This page created and maintained by
A. Green Co., P.O. Box 20118, Worcester, MA, USA, PH: 508-791-6800
© 2000 – 2020 A. Green Co., Incorporated. All Rights Reserved.