Home | Available Used Machinery | New Machinery | Your Surplus Machinery | Your Machinery Needs | Appraisal | Email Us to Request a Quote.

 

LNS Quick Load Servo S2 Magazine Type Bar Feed, New 2006.

LNS Quick Load Servo S2 Magazine Type Bar Feed

Specifications: 

Weight……………………………………………………….... 600 kg (1360 lb.)

Overall length…………………………………………………. 2048 mm (80.6")

Overall length when fully retracted in Z-axis…………………. 2648 mm (104")

Overall width………………………………………………….. 1486 mm (58.5")

Magazine depth…………………………………………………. 1000 mm (39")

Height………………………………………….. 1248 - 1748 mm (49.2" - 68.8")

Centerline range;

  900 - 1149 mm (35.4" - 45.2")

  1150 - 1400 mm (45.3" - 58.14")

X and Z axis retraction trave…………………………………… l600 mm (23.6")

Minimum diameter (round)…………………………………. 6 mm (.23" or 1/4")

Maximum diameter (round)……………………………………… 120 mm (4.7")

Minimum bar stock length……………………………………. 130 mm (5.1") (*)

Maximum bar stock length………………………………….... 1600 mm (63") (*)

Maximum bar stock weight……………………………………………….... 60 kg

Air pressure………………………………………………………… 5 bar (75 psi)

Maximum air consumption……… 6 liters (1.58 us.gal) during loading cycle only

Main electrical power (volts)…………………….. 220 - 480 volt / 50 Hz - 60 Hz

Maximum current rate (amps)………………………………………………… 1 A

Pushing force/torque………………………………………… 167 Nm (167 N/3ft.)

Maximum feed rate………………………………… > 100 m/min. (>3937 I/min.)

Loading cycle for bar stock………………………………………... 8 - 12 seconds

Loading cycle for shaft loading (one shot)……………………….…. 4 - 7 seconds

Electrics…………………………………..….. 3ph/50-60Hz/0.2 KW/24V Control



Equipped with:

Miscellaneous pushers and sleeves

Manual

DESCRIPTIONS ARE CORRECT TO THE BEST KNOWLEDGE OF THE SELLER BUT ARE NOT GUARANTEED.
BUYERS ARE ENCOURAGED TO CHECK IMPORTANT CHARACTERISTICS.

 

Please email us for a complete quotation. Include in the message your name, company name, location, and phone number.
We do not send quotations without this information.

Email Us to Request a Quote.


Home | Available Used Machinery | New Machinery | Your Surplus Machinery | Your Machinery Needs | Appraisal

 

Link to Direct Capital

- FINANCING BY DIRECT CAPITAL -.

 

This page created and maintained by
A. Green Co., P.O. Box 20118, Worcester, MA, USA, PH: 508-791-6800
© 2000 – 2020 A. Green Co., Incorporated. All Rights Reserved.