36" x 157" Poreba TRP 93X4M Lathe, New 1996.

Specifications:

Swing over bed................................................................................................... 36".

Swing over cross slide........................................................................................ 25".

Swing in removable gap..................................................................................... 45".

Distance between centers.................................................................................. 157".

Spindle nose.................................................................................................. A-1-11.

Hole through spindle........................................................................................ 3.75".

Spindle speeds....................................................................................... 9 - 900 rpm.

Spindle lock for milling, every....................................................................... 5 deg.

Weight capacity bet. centers (unsupported)............................................. 13,250 lb.

Weight capacity bet. centers (w/1 steady)................................................ 16,750 lb.

Weight capacity bet. centers (w/2 steadies).............................................. 20,250 lb.

Weight capacity bet. centers (on chuck)..................................................... 2,200 lb.

Longitudinal Feeds (cross=1/2)................. 0.0043 - 0.498 ipr (0.11 - 12.8 mm/rev).

Inch threads............................................................................................. 1/4 - 30 tpi.

Metric threads......................................................................................... 1 - 120 mm.

Long thread leads.............................................................................. 1/32 - 3-3/4 tpi.

Tailstock quill travel............................................................................................ 12".

Tailstock quill taper........................................................................................ #6 MT.

Motor......................................................................................... 22/36 Hp/3/60/440v.

Dimensions (approx.)............................................................. 257"L x 76"D x 72"H.

Weight (approx.)....................................................................................... 23,000 lb.

Equipped with:

24" 3-Jaw chuck.

Dorian #SD60EA quick change tool post w/ one holder.

Model 40-400 steady rest (1.5" - 15.75").

Model 20-200 follow rest (0.75" - 7.87").

Newall model DPG 2-axis DRO.

Power feed to compound (taper cutting).

Spindle jogs. 6-Way rapid traverse.

5 Degree spindle locking for milling.

1:1 & 1:5 tailstock quill traverse.

Manufacturing stops.

Thread dial.

Change gears.

Manual.

We try to give accurate and reliable descriptions, but these are not guaranteed and we advise prospective purchasers to check important details.

Please email us for a complete quotation. Include in the message your name, company name, location, phone number, and fax number. Our software cannot generate a quotation without this information.

Email Us